Function Menu - Ibiza Light PLUTON10-LZR Manual De Instrucciones

FUNCTION MENU

ADDR
CHND
SHND
SLND
dINd
AUTO
SENS
PINT
TINT
LED
DISP
TEST
RSET
Settings
DMX Address Setting
1. Press the MENU, UP or DOWN button until "ADDR" is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm.
DMX channel mode
1. Press the MENU button until "CHND" is displayed, press ENTER. Either "11CH", "13CH" will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
Show modes 0-4 (Factory programs).
Show mode can run with or without sound active mode active.
1. Press the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between 0-4. Programs 1-4 are factory programs, while
"Sh 0" is random mode. Press the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER.
dINd
This option is for setting dimmer curves. Press MENU to select dINd, Then press Enter to start setting, UP or DOWN
to select the dimmer curves, there are five dimmer curves Stda, StGE, tv, ArAL and tHAL for your choice, then press
Enter again to confirm your selection.
Stda Standard
©Copyright LOTRONIC 2017
001 - 512, DMX Address setting
11 ch
13 ch, select the channel mode
SHOW 0 – SHOW 4, Select the show mode
Mast
SL 1
SL 2 ( MASTER, SLAVE OPTION)
Dimmer Mode
Stda(Standard)
StGE(Stage)
tv(TV)
ArAL(Architectural)
tHAL(Theatrical)
OFF (sound controlled mode)
ON (Auto Mode)
000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
Yes - No (PAN Reverse)
Yes - No (TIL Reverse)
On - Off (Background LIGHT ON/OFF)
Disp
Dsip (Reverse Display)
Test
Reset
PLUTON10-LZR Page 4