LUGGAGE RACK
1 | General information
These instructions for installation and use apply exclusively to the product described.
They contain important information on installation, safety and warranty. You should
always follow these instructions, including if you give the product to someone else.
Keep them in a safe place so that you can refer to them again later.
Thank you for purchasing this universal luggage rack for mounting on tubular motorcycle
handlebars. The luggage rack is suitable for use on vehicles with tubular handlebars
with a diameter of 22 mm or 25.4 mm which have a straight central section, as viewed
from above, measuring 180 mm, and with handlebar clamps no more than 136 mm
apart, when measured from the outer edges. Be sure to follow the installation and
safety instructions below to ensure that the luggage rack is correctly fitted to your
motorcycle and is safe to use.
2 | Scope of delivery
A.
A. Handlebar luggage rack
B. 2 clamps with reducer sleeves
C. 2 hex nuts M10 x 1.25 mm
D. 4 hexagon socket screws M10 x 20 mm
B.
C.
D.
9