Publicidad
Idiomas disponibles
Idiomas disponibles
32
through the optional modes: DTS 2.0 channel down mix, DTS 96,
or DTS 96 with Rotel XS center back processing.
Digital Stereo discs
This group of recordings includes any non-Dolby Digital 2-channel signal
from the receiver's digital inputs. You can play these recordings in 2-CH
Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also
use Dolby Pro Logic II matrix surround (5.1 ch systems), Dolby Pro Logic
IIx Music (6.1/7.1 ch systems), Dolby Pro Logic IIx Cinema (6.1/7.1 ch
systems), Dolby Pro Logic IIz (7.1 CH system), DTS Neo:6 surround, or
one of the DSP 1-4 modes.
All of the bass management settings (speaker size, subwoofer, and
crossover) are in effect with digital stereo inputs.
Note: In addition to the options that follow, you can select 2-channel,
Pro Logic II Cinema (for 5.1 ch systems), Pro Logic II Music (for 5.1 ch
systems), Pro Logic IIx Music (for 6.1/7.1 ch systems), Pro Logic IIx Cinema
(for 6.1/7.1 ch systems), Dolby Pro Logic IIz (7.1 ch system) by pressing
one of the surround mode buttons on the remote (2CH, PLC, PLM).
•
To select any mode for 2-channel digital recordings.
SUR+ button on the remote, then use the Left/Right buttons to step
through the optional modes until the desired mode is displayed.
•
To select STEREO mode for 2-channel digital recordings.
2CH button on the remote.To select Dolby multichannel modes for
2-channel digital recordings. You can also step through the Dolby
options (Pro Logic I, Pro Logic IIx/IIz, or 3-Stereo) by repeatedly
pressing the PLIIx MODE button on the front panel. You can select
Pro Logic or Pro Logic IIx Cinema or Music modes by pressing the
PLCM button on the remote.
To change the Cinema or Music option in Pro Logic II mode, press
the SUR+ button on the remote twice while in Pro Logic II or Pro
Logic IIx modes. Then, press the Left/Right buttons to select the
option.
•
To select DTS Neo:6 mode for 2-channel digital recordings.
can also step through the DTS options (Neo:6 Cinema or Neo:6
Music) by repeatedly pressing the DSP button on the front panel.
To change the Cinema or Music option in Neo:6 mode, press the
SUR+ button on the remote twice while in Neo:6 mode. Then, press
the Left/Right buttons to select the option.
•
To select DSP multichannel modes for 2-channel digital
recordings. You can also step through the DSP options (MUSIC
1-4, 5CH, 7CH) by repeatedly pressing the DSP button on the
front panel.
Analog Stereo
This type of recording includes any conventional stereo signal from the
receiver's analog inputs, including analog audio from CD players, FM
tuners, VCRs, tape decks, etc.
Analog stereo inputs require a choice about how the signal is routed
through the receiver. One option is the analog bypass mode. In this mode,
the stereo signal is routed directly to the volume control and the outputs.
It is pure 2-channel stereo, bypassing all of the digital circuitry. None
of the bass management features, speaker level settings, EQ settings,
or delay settings are active. There is no subwoofer output. A full-range
signal is sent directly to two speakers.
The other option converts the analog inputs to digital signals, passing them
through the digital receivers in the RSX-1562. This option allows all of
the features to be active including bass management settings, crossovers,
subwoofer outputs, EQ settings, etc. In this mode, you can select several
surround modes including 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,
7-CH Stereo modes. You can also use Dolby Pro Logic II or Pro Logic IIx
surround, DTS Neo:6 surround, or one of the DSP 1-4 modes.
•
To select Stereo or Analog bypass mode for 2-channel analog
recordings. Press the 2CH button on the remote or front panel to
toggle between Stereo (with digital processing) or Analog Bypass
(no digital processing) modes.
•
To select any mode for 2-channel analog recordings.
button on the remote, then use the Left/Right buttons to step through
the optional modes until the desired mode is displayed.
•
To select Dolby multichannel modes for 2-channel analog recordings.
Press the
You can also step through the Dolby options (Pro Logic II, Pro Logic
IIx, or 3-Stereo) by pressing the PLIIx MODE button on the front
panel. You can select Pro Logic or Pro Logic IIx Cinema or Music
modes by pressing the PLCM button on the remote.
Press the
To change the Cinema or Music option in Pro Logic II mode, press
the SUR+ button on the remote twice while in Pro Logic II or Pro Logic
IIx modes. Then, press the Left/Right buttons to select the option.
•
To select DTS Neo:6 modes for 2-channel analog recordings.
also step through the DTS options (Neo:6 Cinema or Neo:6 Music)
by repeatedly pressing the PLIIx MODE button on the front panel.
To change the Cinema or Music option in Neo:6 mode, press the
SUR+ button on the remote twice while in Neo:6 mode. Then, press
the Left/Right buttons to select the option.
You
•
To select DSP multichannel modes for 2-channel analog recordings.
You can also step through the DSP options (DSP 1-4, 5CH, 7CH) by
repeatedly pressing the DSP button on the front panel.
RSX-1562 SURROUND SOUND RECEIVER
Press the SUR+
You can
Publicidad
Capítulos
