Publicidad
Idiomas disponibles
Idiomas disponibles
- It fails to pass the inspection.
- It shows significant wear, deformation, cracks and
corrosion.
- After an overload or a major impact. They could cause
internal or invisible damage that may significantly
weaken its strength. In case of uncertainty treat the
device as damaged or consult SKYLOTEC.
- When its full history of use is not known.
Packing, storage, maintenance and cleaning
Each product is packed with its INSTRUCTIONS FOR
USE.
Proper maintenance and storage are imperative to
ensure correct functioning of the product (as well as all
your equipment) and thus your safety.
Clean the product with a brush under running cold water
of domestic supply. If the stains persist, clean it in
lukewarm water with ordinary soap. Then rinse
thoroughly, wipe it with a towel and dry naturally in a
shaded ventilated place away from sources of heat.
If needed, oil sparingly the moving joints of the
descender.
Temperatures
While it is permissible to use this product within the
temperature range from -30 °C (140°F) to +60 °C (-22
°F), it is advisable to stock it in a dry place at room
temperature.
Lifetime
Lifetime is set by the date of production and is
theoretically unlimited. Service time starts with the date
of first use and depends on frequency and mode of
application, on environment where it is used (e.g.
marine,
cave,
corrosive
atmosphere),
and
on
mechanical wear and damage. It is therefore very
difficult to determine the expected service time of a
particular device. Its due retirement is therefore left to
user's regular examinations and competent person's
annual inspections.
Guarantee and its limitations
This product is guaranteed for 3 years from purchase
against any faults in materials or manufacture. The
guarantee does not apply in cases of misuse using it
17
Publicidad
