General Information; Uses; Pump Labelling; Pump Maintenance And Demolition - EBARA Ego Manual De Instrucciones Para Uso Y Mantenimiento

GENERAL INFORMATION

1
1.1

USES

The Ego circulating pumps are used for the transfer of liquid medium within systems for hot-water heating, air- conditioning
and ventilation. They are designed as single or twin (T) variable-speed pumping aggregates where the speed is regulated
GB
by electronic device. The pump constantly measures pressure and flow and adjusts the speed according to the set pump
mode. The main purpose of the twin pump is uninterrupted operation if one of the pumps fails. Common hydraulic housing
is equipped with a change-over flap and two pump heads, separately connected to the electrical grid.
Ego B circulators, thanks to bronze body, are suitable for plants with sanitary water.
Only single version is available.
1.2

PUMP LABELLING

Ego ... 50
1.3

PUMP MAINTENANCE AND DEMOLITION

Pumps are designed to operate without maintenance for several years. When demolishing the electro pumps, follow
strictly the regulations in force in your country. The user is responsible for disposing the equipment by delivering it to a
collecting point for recycling and disposal of electrical equipment. For further information about the collecting points of
equipment, contact your local authority for waste disposal, or the shop where you purchased the product.

SAFETY

2
These instructions should be studied carefully before installing or operating the pump. They are meant to help you with
installation, use and maintenance and to increase your safety. Installation should only be performed with regards to local
standards and directives. Only qualified personnel should maintain and service these products.
Safety functions are only guaranteed if the pump is installed, used and maintained as described in this manual.
...
18 m version (H)
Nominal pipe diameter (DN)
Twin pump
T
B Brass version (sanitary water)
C
Version with Module C integrated
Pump family
18