Technical Specifications - Hudora Fold Up 180 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
giving the product to a third party. This product must be assembled by an adult.
This product is not designed for industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Football goal Fold Up 180
Item number: 76911
Item weight: ca. 4.3 kg
Dimensions when assembled: ca. 180 x 120 x 90 cm
Purpose: Quick assembly, portable small goal for versatile
deployment options.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
1 x Football goal, folded
1 x Carry bag
4 x Pegs
1 x Usage instructions
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months old due to long cords!
Strangulation Hazard.
• Prior to use, check all parts of the goal for damages and correct assembly. In
this regard, it is important to check the connecting elements for stability and
fit. Any sharp edges that might have formed must immediately be removed!
• Warning: Do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• Keep young children away while assembling to prevent any risk of strangula-
tion from long cords! For this reason, cut off cord ends to a maximum of 5 cm
after the assembly.
No liability is assumed for damages resulting from incorrect application of the
instruction manual.
ASSEMBLY INSTRUCTIONS
Assembly of the goal frame
1. Pull the two red poles of the goalpost away from each other as shown in the
illustration.
2. Press the coated red cross-pole downwards until both ends click into place.
3. Now push the red posts outwards.
4. Secure the posts by inserting them into the red bottom tube.
5. Now swing the two red back-support stands outwards.
6. Pull the inner black pole out of the red posts and click them into place.
7. Stretch the rubber bands in the corners of the textile goal frame over the not-
ches at the end of the black poles.
8. To increase the tension of the net, fix the attached hook and loop fasteners
around the rear goal post.
All images are examples of the design.
Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and have
firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds
the goal must be saved by appropriate measures in another way against overtur-
ning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play
with an unsecured goal and never leave the goal unsecured respectively.
Folding the goal
After using the goal you can easily and comfortably fold it and put it in a dry place
for storage. The net and all rods need not to be removed. Follow the first eight
assembly steps in reverse order to disassemble.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• For repairs, please only use original parts
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it in
a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become da-
maged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.
de/). Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service/.
4/8