Initial Commissioning; Overview And Processing Sequence - Auerswald COMfortel WS-500S Manual De Instrucciones

Initial Commissioning

PBX
• creates the connection to the public telephone network
• provides a central administration point for telephone connections and
telephone books
Initial Commissioning

Overview and Processing Sequence

You can do this in one of two different ways:
• Provisioning via the PBX (page 28)
• Configure them manually using the Web Configurator on the base unit
(page 28)
Provisioning via the PBX
1 Take the DECT measurements and carry out site planning
2 Bring the devices to the planned sites
3 Configuring the PBX for provisioning
4 Connect the devices to the local network (LAN)
5 Only COMfortel WS-500M: Set the device role "DECT
Manager and Integrator" on one device.
6 Registering the handsets
Configure them Manually Using the Web Configurator on the Base Unit
1 Take the DECT measurements and carry out site planning
2 Bring the devices to the planned sites
3 Connect the devices to the local network (LAN)
4 Only COMfortel WS-500M: Set the device role "DECT
Manager and Integrator" on one device.
5 Log in to the Web configurator
6 Configuring a base station
7 Registering the handsets
28
COMfortel WS-500S/500M - Instructions V02 08/2019
page 29
page 29
page 30
page 31
page 32
page 29
page 29
page 31
page 32
page 33
page 33