Disc Playback; Various Playback Modes - ECD XMS 1111 U Manual De Instrucciones

Retrieving the preset stations from memory
• If you want to call up a station stored in memory, press repeatedly the button v or V in the standby mode
until the required preset is tuned in.
Note: In the event of a power failure the clock of the device and the preset radio stations must be set again. The
display will ash "12:00", indicating a power outage. Store again the presets using procedure described above.
CD control

Disc playback

Press POWER 1 to turn the device on.
1.
2. Press the button
OPEN/CLOSE to open the CD tray.
then press
3. Insert the disc by pushing outward. Press again the button
4. The device loads the disc, "READ CD" appears. After a few seconds the display shows the total number of
tracks and the length of the disc. Note: For MP3 CDs, the total number of tracks is displayed and time 00:00.
Press PLAY/PAUSE
5.
6. Adjust the volume using buttons
7. If you want to stop playback (pause), press the button PLAY/PAUSE
icon starts ashing. Press again to continue playback.
8. If you want to skip to a required track, press brie y
FOLDER to skip to another folder or +10 to skip 10 tracks.
9. If you want to move forward or back in the currently played track, press and hold the button
Once you reach the required spot, release the button, regular playback will continue.
10. If you want to stop playback, press STOP x.

Various playback modes

You can any time during CD playback press the button FM ST/MODE to toggle between various modes of
playback.
When playing CD, the modes are switched in the following order:
Repeat 1 c Repeat all c Random playback c Regular playback
When playing MP3 CD, the modes are switched in the following order:
Repeat 1 c Repeat folder c Repeat all c Random playback c Regular playback
Repeat 1: The currently played track will replay repeatedly. The icon
Repeat folder: The songs of one folder are played repeatedly. Icon
Repeat all: All songs are replayed repeatedly. The repeat icon is on
Random: The songs on the disc are played in random order. The icon "RAND" is on.
Programming of tracks (only remote control)
You can create a program where the songs are played in order selected by you. You can create the program
only when the playback is stopped.
1. When you stop the CD, press the button PROG/PRESET. The display shows "PROG" icon along with the
track number "00" and a free program position (at the beginning of the programming shows "00 P-01").
/
2. Use buttons
the program position.
3. Press SELECT to save the selected track in memory. The display shows the next program position (e.g.
02-P) and the track number returns to "00".
4. Repeat steps 2 and 3 to program other tracks. A program may contain up to 20 tracks.
Press PLAY/PAUSE
5.
6. Press FM ST/MODE to select repeated or random playback of the program tracks.
7. Stop playback by pressing the button STOP x.
If you want to delete the program, press STOP x twice. The indicator "PROG" disappears from the display.
8.
XMS 1111 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 63
on the device or FUNCTION on the remote control to select CD playback mode and
to start playback of the rst track.
on the device or VOL+/- on the remote control.
to select the required track. The number of the track appears before the number of
to start playback of the created program.
to close the CD tray.
once. The time of the track and the
or . In case of an MP# disc you can use the button
ashes.
is lit, icon MP3 ashes.
.
GB
or .
63
63
17.07.2016 16:00:44