Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk RS 501 Instrucciones De Uso

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

This Manual is an integral part of the machine; its purpose is to provide the operator with all necessary information to use
the machine properly in a safe and autonomous way. It contains information about technical data, safety, operation, storage,
maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
Nilfisk in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualified to operate the machine and perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Nilfisk will not be responsible for damages coming
from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The Instructions for Use Manual must be kept inside the machine cab, away from liquids and other substances that can cause
damage to it.

IDENTIFICATION DATA

The machine serial number and model are shown on the adhesive label (1, Fig. C) and the plate (21, Fig. E) affixed inside the cab.
The machine serial number is also printed on the machine side (23, Fig. G).
The diesel engine serial number and model are marked in the positions shown in the relevant Manual; in some countries, a plate
showing the same data is provided in the position (31, Fig. G).
This information is useful when ordering machine and diesel engine spare parts. Use the following table to write down the machine
and diesel engine identification data for any further reference.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
ENGINE model ..................................................................................
ENGINE serial number ......................................................................

OTHER REFERENCE MANUALS

The sweeper is also supplied with the following manuals:
– Diesel Engine Manual, to be considered as integral part of this Manual.
– Sweeper Spare Parts List
At Nilfisk Service Centers the following Manual is also available:
– Sweeper Service Manual

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Nilfisk Service
Centers. Only original spare parts and accessories must be used.
Call Nilfisk for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

Nilfisk constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Nilfisk.
INSTRUCTIONS FOR USE
RS 501 33015498(3)2008-02
ENGLISH
3