Press the
push button to confirm the speed of the motor for the interval function.
■
When you are in the setting phase, if the interval function shown is not confirmed within
some seconds, then you get out of the setting mode for the interval function.
By pressing any push button, light excluded, the interval function is excluded.
The remote control has a battery. When the battery is exhausted you need to:
loosen the 2 screws on the rear part and remove the cover;
■
take the battery out and replace it with one with the same characteristics;
■
close the cover again and tighten the screws.
■
Follow National norms for waste disposal of exhausted batteries.
31