CLEANING
To preserve the hood in good condition, clean this periodically following the advice given
as follows.
Make sure that power has been completely turned off.
The detergent solution recommended is a combination of WATER and NEUTRAL
LIQUID SOAP. It is of vital importance that the liquid soap should not contain any
grains which could scratch the surface.
The solution should be applied first onto a soft cloth which is then rubbed over the
shell. It is important to follow the pattern of the satin finish with the cloth.
It is absolutely forbidden to pour liquids directly onto the hood.
The cloth used should not have any buttons, zips, fasteners or anything else which
could scratch the surface.
The use harsh abrasive or granular products, petrol, spirits or similar products which
could damage the surface of the materiall, is severely forbidden.
The manufacturer will not be responsible for any damages either functional or to the
appearance of the hood, caused by cleaning operations carried out using unsuitable
products or unsuitable methods.
ACCESSORIES
The following optional accesories are available and are sold separately:
ONE USE CARBON FILTERS;
■
CARBON FILTERS THAT CAN BE REGENERATED;
■
FILTERING KIT;
■
CHECK VALVE.
■
IF YOU ENCOUNTER A PROBLEM
Disconnect the hood from the mains electricity supply and keep it disconnected for ca 1
minute, then reconnect.
If the behaviour of the hood seems strange, read the procedure for resetting carbon and
grease filters concerning the kind of control in your hood. (see FUNCTION AND USE).
If the lights of the lamps is weak when the hood is in stand-by, then invert the plug.
33