Technical Data; Safety Instructions; Work Area Safety - Hilti TE 7 Manual De Instrucciones

Designation
Quick-release chuck for wood and metal drill bits
Key-type chuck
Wood drill bits
en
Metal drill bits
Metal drill bits / stepped drill bits
Designation
Dust removal attachment
Angular chuck
Angular chuck
Keyless chuck
Bit holder

4 Technical data

Right of technical changes reserved.
Rated voltage
Rated current input
Rated frequency
Power tool
Weight
Dimensions (L x W x H)
Speed under no load
Hammer drilling speed
Single impact energy
Other information about the power tool
Chuck
Protection class

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety
rules for power tools which, in accordance with the
applicable standards, require to be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
4
Description
For smooth or hex. shank
For smooth or hex. shank
∅ 5...20 mm (³⁄₁₆ to ³⁄₄")
∅ 5...13 mm (³⁄₁₆ to ½")
∅ 5...22 mm (³⁄₁₆ to ⁷⁄₈")
Short designation
TE DRS-M
120 V
6.3 A
60 Hz
TE 7
2.9 kg (6.39 lb)
320 mm (12.6") x 75 mm (2.95") x 215 mm (8.46")
0...1,050/min
860/min
1.8 J
TE‑C Click
see type identification plate
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
Description
C-type connection end
TE‑AC1