Programme Number „ 0 - Primus IFF 50 Manual De Uso

CORRECT:
INCORRECT:
If you press the push-button, fig. 4.1.A, pos.4 without the linen being in the clamps, wait until the clamps
come to the standard position.
MANUAL LINEN FEEDING
By using the key „ O " it is possible to select automatic or manual feeding of linen. After selecting manual
feeding the clamps drive up to edge positions and the button, figure 4.1.A, pos. 4, will turn off – machine is
prepared for manual feeding.
– If you don´t manage to feed the linen correctly by the feeder or manually, it is possible to put it out by hand.
– If the linen is already clamped inside the machine, it is possible to stop the machine by pressing the finger
guard, figure 4.1.B, pos. 6 and to start the back stroke by pushing the button „ J " and to remove the linen
carefully. This operation can be executed only within the time period necessary for removing the linen and
therefore it is time limited to several seconds! If you need more time for the back stroke, you must push
the button for the back stroke repeatedly. Then you must start again normal operation by pushing the button „ I ".
– After removing the linen it is convenient to reset folding by pushing the button „ K ", so that further folding
of pieces is without problems.
– If you do not wish the just inserted linen to be ironed and folded up, press „ N " key and the linen will
quickly come out.
4.1.1. PROGRAMME NUMBER „ 0 "
If you enter the question:
Choose the desired
Recipe number: XX
„ 0 " as a required programme number which you select by „ A ", „ E " keys, and verify by pressing „ I " key,
you can step by step enter your parameters, which are however not stored in memory, and they disappear
after selection of another programme.
Enter the values by the keyboard and always verify by the „ I " key. To the question:
[ Input : degrees C ]
Temperature : XXX
enter the required temperature in range 10 – 180°C according to the textile manufacturer, or the temperature
table values, corresponding to your linen.
TEMPERATURE (°C)
80
105
130
165
170
[ Input : cm/min ]
Machine speed : XXX
enter the required ironing speed in the range of 150 – 800 cm/min. Then, according the kind of folding enter:
[ Input : cm ]
Fold length : XX
– the required folds length X, fig. 4.1.1.A in range 25 – 40 cm
505 558 PUB DATE: 11/02
Fig. 4.1.B
MATERIALS
Polyacryl, Polyamid
Polyester, Cellulose
Silk
Wool, cotton
Flax
Fig. 4.1.1.A
USER´S MANUAL
Tab. 4.1.1.
7