NZI Helmets FIBR UP Manual De Usuario página 9

O W N E R S
scratches or marks appear during the use;
they can impair your view.
Changing the Sun Visor
Disassembly:
To take out the sun visor, you have to pull the
two sides of it until the sun visor becomes dis-
connected from the mechanism (Fig. 7 & 8).
Assembly:
To insert a new sun visor, follow the steps de-
scribed before (Fig. 7 & 8) in reverse order.
VISOR
Instructions:
Clean the visor only with water and neutral
soap. To dry the visor it is not necessary to
Fig. 7
M A N U A L
Fig. 8
rub; dabbing will do. We strongly recommend
you to avoid the use of any kind of solvents,
alcohol or abrasive products on the visor. It
is recommended to replace the visor when
scratches or marks appear during the use;
they can impair your view.
Replacing the visor.
Disassembly:
Place the helmet on a solid and flat surface
and completely open the visor; pull the lever as
it is shown by the arrow (Fig. 9) until it reaches
its maximum displacement and take out the
visor from the mechanism (Fig. 10); first take
out the geared part and then the circular zone.
Repeat the same sequence on the other side.
Assembling:
Fig. 9
GB
Fig. 10
9