Gaggia K 111 D Instrucciones De Uso página 32

Default settings control the amount of water that is dispensed for each type of coffee.
These settings can be changed by the user to his /her liking in order to make a stronger or
weaker coffee.
For each type of coffee, the user can set one amount of water only.
User settings according to user taste
• Insert the capsule into the capsule holder.
• Pull the lever down.
• Place a cup in the middle of the drip tray grating.
• Press the ON/OFF switch button to turn ON the appliance. The button will start blinking.
When the button stops blinking and lights steadily, the machine is ready for use.
• Press the button corresponding to the amount of water to be set.
Default settings can be changed for caffé lungo, cream coffee and espresso coffee.
• When the desired amount of water has been dispensed, release the button. The machine
will then learn the new amount.
• Check if the new setting is correct. If not, repeat the procedure.
Note:
The coffee machine incorporates an advanced electronic system to control its numerous
functions for making coffee and dispensing steam.
To prevent malfunctions, do not turn on the coffee machine immediately after turning it
off. Wait about 0 seconds before switching it on again. Also, adhere to the operating
instructions.
Resetting the default settings
The Reset function allows the user to return to factory
settings after he/she has made personalised settings.
• Press the ON/OFF switch button to turn OFF the
appliance.
Press and hold the two buttons shown by the figure
simultaneously (Fig. 20).
• Turn ON the machine by pressing the ON/OFF
switch.
• Release the buttons after 5 seconds.
• Press the ON/OFF switch button to turn OFF the
appliance.
• Turn ON the machine again by pressing the ON/OFF
switch.
The default settings are now reset.

coffee selection buttons
Fig. 20