Guarantee Certificate - Arregui COVER Manual De Instrucciones

<EN>
7. OTHER CONTROL ELEMENTS
SCREEN CONTROL: To configure the screen so it does
not display the digits that are entered, press the
button and then the 3 button. If you would like the
screen to display what you enter, press the
button again.
SOUND CONTROL: To use the safe in silent mode,
press the button and then the 6 button. If you
would like the safe to emit sounds again, press the
6 button again.
BATTERY STATUS CONTROL: If you would like to
know whether the batteries are sufficiently charged,
press the button while the safe is closed. If the
batteries are fine, the screen will display HI-BAT, and if
they are not, the message will be LO-BAT. In that case,
you should replace the batteries with new ones.
In any case, if the batteries are not sufficiently charged,
the system will warn you of this when the safe is
opened and closed by displaying the OPEN LO-BAT or
CLOSE LO-BAT messages on the screen, respectively.
NOTE: During the battery change process, the safe will
not forget the codes that have been entered.

GUARANTEE CERTIFICATE

The safe is guaranteed for a period of 24 months from the date
of its purchase, as established by the Law 23/2003 dated July
10th on Guarantees in the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared
within a period of two years in the event of any manufacturing
3
fault which affects the functioning of the safe from the date of
its delivery, according to the law. As from the first 12 months,
the buyer must prove that the non-conformity already existed
at the moment he received the safe.
The faults produced as a result of an improper use or insta-
llation, an excess of humidity or salinity, water or cement fil-
trations, force, the handling of the devices by non-authorized
persons, disasters, impacts and falls are excluded from the
guarantee.
The repair or substitution of any part due to a fault implies a
6-month extension to the guarantee of the part repaired or
substituted. ABSS will accept the responsibility for the non-
conformities that caused this repair when the same factory
faults that caused the first repair are repeated.
Identity details
Name of the supplier ..............................................................
Date of sale ................................................................................
Name of purchaser ..................................................................
Address of purchaser .............................................................
Identifying details of the safe
Model ........................................................................................
Series number .......................................................................
IMPORTANT:
• These details must be completed as clearly as possible and
without delay by the supplier, who will stamp and sign on be-
half of his company in the place indicated.
• The certificate remains in the possession of the purchaser.
• The purchaser must keep the RECEIPT for the purchase of the
safe, together with the GUARANTEE CERTIFICATE to be able
to accredit the date of purchase. Both documents are neces-
sary to use the guarantee.
SUPPLIER'S STAMP