Series Recording - Sony SVT-96LP Manual De Instrucciones

Recording
6
Press SEARCH to return to the normal display.
7
Press REC z.
Recording begins.
Note
If the REPEAT REC switch is set to OFF while repeat
recording is in progress, recording proceeds until the end of
the tape is reached and then stops automatically after the
tape is rewound to the beginning. The OFF indicator lights
in the display window.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.
22

Series Recording

Connect another SVT-96LP for series recording (for
details on connection, see page 9) and set each of the
units as follows.
Item Unit #1
SERIES REC on ON
ALARM SET menu
TAPE END WARN. on COUNTER COUNTER COUNTER
ALARM SET menu
Cassette tape Loaded
Operating status Recording Turned off Turned off
REPEAT REC OFF
Security lock Locked
Timer recording Deactivated Deactivated Deactivated
When all of the settings are complete, set unit #1 in
recording mode and turn off the power of unit #2 and
subsequent unit.
When recording on unit #1 is complete, the power for
unit #2 turn on and recording begins (The recording
cannot be done for about 11 seconds.).
The unit #1 rewinds its tape and turns off.
When a E-180 or E-240 tape is used and TAPE END
WARN. is set to COUNTER, the unit #2 starts
recording before the unit #1 stops so that recording is
continued without stop.
Note
For series recording, set SERIES REC in the ALARM SET
menu to ON. If it is set to OFF, recording cannot be done
even if a signal is input to the SERIES IN terminal.
Unit #2 Unit #3 and
subsequent
unit
ON ON
Loaded Loaded
OFF OFF
Locked Locked