Playback - Sony SVT-96LP Manual De Instrucciones

Playback

1 2
REAL TIME/
COUNTER
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing REC/PLAY
SPEED – or +.
The selected playback speed is displayed in the
display window.
4
Press PLAY B.
Playback starts.
To stop playback
Press STOP x.
To rewind the tape
Press STOP x and then REW m.
To fast-forward the tape
Press STOP x and then FF M.
Resetting the tape counter
The tape counter in the display window helps you to
locate a certain scene after playback. Set the REAL
TIME /COUNTER switch to COUNTER and press
COUNTER RESET to set the counter to "0H00M00S"
(counter zero) position before playing back the tape.
The VCR keeps counting the length of the tape being
played back. Note, however, that the tape counter will
not count the portions without video signals.
Notes
• You cannot play back tapes recorded on other time-lapse
VCRs on this VCR and vice versa.
• If ALARM DATA REC in the ALARM SET menu and/or
TAPE USED COUNT in the GENERAL SET menu is set
to ON, the VCR will rewind the tape and playback will
start from the beginning of the tape. While the VCR is
rewinding the tape, "<ALARM DATA REC>" and/or
"<TAPE USED COUNT>" flashes on the monitor screen.
Playback speed
You can view the playback picture at one of the
following speeds.
3 4
REW FF STOP
m M x
For example, when a tape recorded in 96-hour mode is
played back in 6-hour mode, you can view the
playback picture at a speed 16 times faster than the
recorded one.
Recording Playback speed
speed
6 (8) 18 (24) 30 (40) 48 (64) 72 (96) 96 (128)
6 (8) 1 1/3 1/5
18 (24) 3 1 3/5
30 (40) 5 5/3 1
48 (64) 8 8/3 8/5
72 (96) 12 4 12/5
96 (128) 16 16/3 16/5
1/8 1/12 1/16
3/8 1/4 3/16
5/8 5/12 5/16
1 2/3 1/2
3/2 1 3/4
2 4/3 1
39