Clock Set In/Out Terminals - Sony SVT-96LP Manual De Instrucciones

4
Press MENU V to move the flashing to the setting
of MODE of SW OUT and set to FIELD or
FRAME by pressing MENU + or – and press
MENU V again.
BUZZER ALARM IN
TAPE END
KEY IN
SW OUT MODE
TIMING
6H MODE
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
5
Set TIMING by pressing MENU + or – and press
MENU V.
TAPE END
KEY IN
SW OUT MODE
TIMING
6H MODE
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
6
When TAPE in the GENERAL SET menu is set
to E-180:
Set 6H (6-hour mode) MODE to ON or OFF by
pressing MENU + or –.
ON: a signal is output in the 6-hour mode
OFF: a signal is not output in the 6-hour mode
When TAPE in the GENERAL SET menu is set
to E-240:
Set 8H (8-hour mode) MODE to ON or OFF by
pressing MENU + or –.
ON: a signal is output in the 8-hour mode
OFF: a signal is not output in the 8-hour mode
7
Press SEARCH to return to the normal display.
ON
ON
OFF
FIELD
0 1
ON
ON
OFF
FIELD
0 4
ON

CLOCK SET IN/OUT Terminals

You can set the clock of this unit using an external
switch.
When you use one unit as the master VCR, you can set
the clock of the units connected to the master VCR
using the master VCR.
When Using an External Switch
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET OUT
When Using One Unit as a Master VCR
Master VCR
to CLOCK SET OUT
to CLOCK SET OUT
External switch
to COM
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET IN
47