Care And Maintenance; Cleaning And Care; Maintenance; Waste Disposal - Aventics DeviceNet Instrucciones De Servicio

AVENTICS | DeviceNet | R402003659–BAL–001–AG
9

Care and Maintenance

Applied electric voltage and high pressure
Danger of injury from electric shock
O
Make sure the system is not pressurized or connected to power
before carrying out any service or maintenance work.
9.1

Cleaning and care

The unit may be damaged by solvents and aggressive cleaning agents
The surface and seals may be damaged if aggressive chemicals are
used.
O
Only use solvents or detergents under short term conditions.
O
Do not exceed the conditions of the IP69K protection class.
The CL03/CL03-XL valve system and the bus coupler are designed for
wash-down areas, which means it can be cleaned with high pressure and
high temperature (IP69K conditions). It is resistant against most common
cleaning detergents in low concentrations for short term exposure.
For detailed information, contact the supplier of the solvents or cleaning
detergents, or contact AVENTICS.
9.2

Maintenance

The bus coupler of the CL03/CL03-XL valve system is maintenance-
free, if used within its technical specifications.
O
Comply with the maintenance intervals and specifications for the
entire system.
9.3

Waste disposal

Dispose of the device in accordance with applicable local regulations.
Care and Maintenance
WARNING
NOTICE
77