Tabla de contenido
Publicidad
GB
Installation and Operating Instructions
Coupling Ball with Bracket (CBB)
Westfalia Order No.:
Type:
EC Auth. Des.:
Application:
EC Authorised Designation:
Attention: If the vehicle to which the towing device is to be fitted is a 300 Turbodiesel model
(engine 606) equipped with air-conditioning or automatic air-conditioning system, a
transmission oil cooler with fan motor and a fan for the engine oil cooler must both
be retrofitted.
If the vehicle is also equipped with a parking/auxiliary heater, this heater must be
removed because it is located in the space where the components mentioned above
have to be installed.
Technical Data:
The tested D-value is 10,8 kN. This corresponds, for example, to a towed weight of 2000 kg and
a permissible total weight of 2400 kg. The tested trailer nose weight is 75 kg. For driving, the data
of the vehicle manufacturer with regard to the towed weight and trailer nose weight are decisive,
whereby the tested values of the CBB may not be exceeded.
Notes:
The CBB is a safety part and may only be mounted by specially trained personnel. Should spare
parts be required, these may also only be mounted on the undamaged original-equipment part by
specially trained personnel.
No changes or modifications to the CBB are permitted.
When driving with a trailer, observe the driving instructions in the vehicle manufacturer's operating
instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the CBB necessitates the removal of the towing eye, the CBB serves as a replacement,
provided the permissible towed weight is not exceeded and the towing takes place on normal
roads.
12
313 160
313 097
e13 00-0024
Mercedes-Benz E Class W 210 (saloon/sedan as of June 1995);
not for AMG vehicles
210, J 0
Publicidad
Tabla de contenido
