EN
OPERATION MANUAL
Dear Customer!
This manual contains important information and
advice for the correct and safe use and mainte-
nance of the ZIPPER mitre saw. The manual is
part of the machine and may not be stored sep-
arately. Read it profoundly before first use of
the machine and keep it for later reference.
When the machine is handed to other persons
always put the manual to the machine.
Please follow the security instructions!
Due to continuous development of our products
illustrations, pictures might differ slightly.
Attention!
Technical changes reserved!
Copyright
© 2010
This manual is protected by copyright law – all
rights reserved. Especially the reprinting as well
as the translation and depiction of pictures will
be prosecuted by law. Court of jurisdiction is
LINZ, Austria.
Customer Support
Z.I.P.P.E.R MASCHINEN GmbH
A-4707 Schlüsslberg , Gewerbepark 8
Tel 0043 (0) 7248 61116 - 700
Fax 0043 (0) 7248 61116 – 720
info@zipper-maschinen.at
1 TECHNICS
1.1
Technical Details
Voltage
Engine power (S1/S6)
Engine speed
Protection class
Maximum teeth on saw
blade
Saw blade diameter
Diameter of the saw
blade bore
Maximum thickness of
the saw blade
Maximum cutting pow-
ers:
Cutting power 0°/ 90°:
Cutting power 45°/ 90°:
Cutting power 0° / 45°:
Cutting power 45° / 45°:
Laser details
Wave length of the laser
Laser power
Packing size
weight (net/gross):
Noise emission: weighted
Lp
Noise emission: weighted
Lw
1.2
Components (Fig. A)
1. Saw blade safe-
ty lock
2. Operation han-
dle
3. ON/OFF switch
4. Saw aggregate
5. Saw blade
6. Saw blade safe-
ty cover
7. Work piece
fence
EN
230V/50 Hz
1.6/2,0 kW
5000 rpm
II
40
250 mm
30 mm
2.8 mm
305 x 78 mm
215 x 78 mm
305 x 42 mm
205 x 42 mm
Class II, EN
60825
650 nm
< 1 mW
760 x 460 x 385
mm
17 / 20 kg
86.0 dB(A)
99.0 dB(A)
Against unintentional lower-
ing of the saw aggregate
With 1. and 3.
Turns on the engine, saw
blade in rotation
Pivotable
HM-saw blade; take care of
the maximum dimensions!
Do not remove!
Adjustable