Spare Part Order; Troubleshooting - Zipper ZI-KGS250 Manual De Instrucciones

5.5 Disposal
DO NOT dispose your ZI-
KGS250 in
waste! Contact your local au-
thorities for
about best available disposal
possibilities in your area. Dis-
aggregate the mitre saw into its compo-
nents before disposing its components.
5.6

Spare part order

With original ZIPPER spare parts you use
parts that are attuned to each other and
shorten the installation time and elongate
your machines lifespan.
I M P O R T A N T
The installation of non-original parts
renders warranty null and void.
So only use original spare parts!
When necessary you can demand the spare
parts list and spare part drawing from the
ZIPPER customer service.
You find the order address in the preface
of this operation manual.

6 TROUBLESHOOTING

Repair and maintenance works may only be
done by persons who have the necessary quali-
fication, experience and aptitude.
Trouble Reason
(Extension-) Ca-
Engine
doesn't ble too long or
run (or
damaged
not cor-
rectly)
Wrong
supply
frequency)
Carbon
battered
Engine damaged
the residual
information
Removal
Unplug
control
another
chine
power Adjust the pow-
er supply to the
(voltage,
machine
quirements
brush Control,
change
necessary
Foreign
pact (over-
voltage
lightning
stroke / etc.)
or overload.
Bring
Saw
blade
gets
stucked
Material
kickback
Wrong
cutting
angle
Wrong
mitre
angle
Saw
blade
touches
the ma-
chine bed
Laser
doesn't
run
Laser
doesn't
show the
cutting
line cor-
rectly
and
with
ma-
re-
when
im-
/
your
machine
your dealer.
Blunt saw blade Sharpening or
changing.
Too hard materi-
al Conform
cutting speed
Too fast cutting
on work piece
hardness and
engine power.
Blunt saw blade Sharpening
changing
Wrong running Control
direction of the
saw blade
Wrong adjusted See3.4
fence
Wrong adjusted See 3.4
fence and/or saw
aggregate
Deepness limita- See 3.3
tion adjusted
wrong
Flat battery Change
battery
Laser adjusted See 3.5
wrong
EN
to
the
or
the