Telecom TANGO SW BLEU Manual De Instrucciones página 39

GB
The timer is fixed for a time of approx. 30 seconds and cannot be
adjusted.
3. Code erasure
One or more codes may be erased from the mem-
or y of the receiver with this operation.
- Press the key P1 or P2 4 times during program-
ming.
- The led related to the pressed button gives 5 series of 4 blinks.
- During this stage, transmit with the radio control to be erased. A fixed
led light for a few moments indicates that erasure has been successful.
4. Erasur e of all codes (reset)
The receiver storage is totally erased by carrying out the reset.
- Press k ey P1 or P2 for at least 10 seconds until the
button LEDs light up simultaneously.
Af ter a few seconds all the LEDs go out, indicat-
ing that erasure is complete.
- Repeat the memorisation procedure.
P L
P1
10 sec.
(P2)
4
39