Zeroing In
If the point of impact of the bullet deviates from the aiming point,
this can be easily and precisely corrected by adjusting the ele -
vation turret(4) and the windage turret(5) of the scope. Regardless of
corrections, the middle point of the aiming mark always stays in the
middle of the field of view. To make adjustments, simply unscrew
the screw-on caps(3) of the elevation(4) and windage(5) turrets.
When the shot is low
Turn the elevation turret(4) in
the direction of arrow.
When the shot is high
Turn the elevation turret(4) in
the opposite direction of arrow.
When the shot is to the left
Turn the windage turret(5) in
the direction of arrow.
When the shot is to the right
Turn the windage turret(5) in
the opposite direction of arrow.
The impact point correction per click can be taken from the
information printed on the elevation(4) or windage adjustment
turret(5) of your rifle scope.
15