Kerbl Moocall Manual Del Usuario página 14

Step 9: Remove
Remove the sensor when it's safe
to do so. Lift the paddle to open
the Moocall door and press the
paddle on the ratchet all the way
to the left to loosen the strap.
Step 10: Clean sensor
Clean gently with a dry brush or
a damp cloth. Always clean the
sensor after each calving.
NOTE: DO NOT submerge the sensor in water or other liquids!
WARNING! DO NOT CLEAN SENSOR WITHOUT CHARGE CAP IN PLACE
Step 11: Resetting sensor
After a calving event, press
the button for one second to
reset. The light will change
from solid red to blinking
blue and the sensor is now
ready to go on the next cow.
The sensor will automatically
reset after one hour if not
reset manually.
To turn the sensor off, press
and hold the power button
for ten seconds.
14