Correct Weighing; Switching The Weight Display; Switching Off The Scale - Seca 676 Manual De Instrucciones Y Garantía

Correct weighing

– Press the Start key with no load on the
scale.
se(a 8. 8 . 8 . 8 . 8 .
, and
utively in the display. The scale is then
automatically set to zero and ready to
use.
– If necessary, switch the weight display
(see page 21).
– Stand on the scale and keep still.
Note
The maximum load on each individual
corner of the weighing platform is
200 kg.
– Read the weighing result off the digital
display.
– If a load greater than 360 kg or 800 lbs
is placed on the scale,
the display.
– To switch off the scale, press the Start
key again.

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lbs) or
between kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.

Switching off the scale

– To switch off the scale, press the Start
key again.
Model 676
0. 0
appear consec-
St0P
appears in
21
GB