OHAUS Valor 2000 Serie Manual De Instrucciones página 5

Valor 2000 Series Scales
IMPORTANT: To relieve any internal pressure and allow proper airflow
inside the scale, unscrew the two rear leveling feet slightly, then level
the scale accordingly. When cleaning the scale, the rear leveling feet
must be screwed in tightly to avoid entry of water inside the scale.
2.4 Power
2.4.1 AC Power
The AC adapter (included) may be used to power the scale when battery power is
not available. Remove the rubber seal in the back. Connect the AC adapter plug to
the input jack. Then plug the AC adapter into a properly grounded power outlet.
NOTE: To prevent water ingress during use, insert rubber Seal into
the input jack recess.
Adjustable Feet
Figure 2-1. Leveling the Scale.
Seal
Figure 2-2. Power Connection and Sealing
Level Bubble
EN-3
.