Sharp LL-T2010W Manual De Funcionamiento página 22

Adjusting the screen display
MODE SELECT Menu
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: SELECT button
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
EXPAND (Screen expansion)
For display modes of less than 1600 X 1200 pixels,
the display can be expanded if desired. (
buttons)
OFF: Expansion off
ON1: Using the fixed aspect ratio, the entire
screen is enlarged.
ON2: The entire screen is enlarged.
Note:
- If a resolution of 1600 X 1200 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharp-
ness of the image can be adjusted. (
Note:
- If [EXPAND] is set on [OFF], [SCALING] cannot
be adjusted.
(When using a digital signal)
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following lan-
guages.
English, German, French, Dutch, Spanish,
Italian, Swedish
1. After selecting [LANGUAGE], press the
The Language Selection Menu will be displayed
on the screen.
2. Select the desired language using the SELECT
button.
3. Press the MENU button.
The Language Selection Menu disappears.
buttons)
22
button.