Troubleshooting Guide - Daga MA-3500 Instrucciones De Uso

Assento de massagem shiatsu
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
back area. Pressing it a third time will activate a massage across
the entire back. The LED displays (8) and (9) allow you to know the
area of the back where the Shiatsu treatment is being applied t all
times.
• Key (13) is used to activate or deactivate the therapeutic heat
function. Use it according to your preferences.
• The activation or deactivation of the vibration massage in the seat
area can be controlled using key (14).
• You can finish the session at any time by pressing key (16). The
revolving heads will automatically return their initial position to be
fully prepared for a new session whenever you want (remember to
always let it rest for at least 15 minutes between sessions).
• Wait for the heads to fully return to their initial position (lower
part of the seat seatback ) before you unplug the appliance from
the mains. When the LED displays (12) stop flashing, this indicates
that the heads are already in their initial position.

TROUBLESHOOTING GUIDE:

Possible operational problems
PROBLEM
The massage
heads do not
move
The heads are
turning too
slowly
The vibration or
therapeutic heat
function does
not work
The heads only
work a particu-
lar area
14
Manual Asiento Masaje MA-3500.indb 14
CAUSE
The appliance is disconnec-
ted from the mains.
Appliance connected to an
incorrect voltage.
Appliance is not turned on.
The appliance is damaged.
Excessive pressure exerted
on the heads.
It is disabled
One of the components has
been damaged
The appliance has been set
for the treatment of a spe-
cific area
SOLUTION
Connect the appliance
to the mains and start
the appliance.
Connect the applian-
ce to an outlet that
supplies the voltage
specified on the label of
this product.
Turn on the appliance
using key (16)
Contact your supplier or
Daga customer service.
Lean on seatback exer-
ting less pressure.
Select the desired
function using the
appropriate key. The
heating function is con-
trolled using key (13)
and vibration function
with key (14).
Contact Daga technical
service.
Use key (15) to change
the area of the back to
be treated.
13/1/16 12:17

Publicidad

Tabla de contenido
loading

Tabla de contenido