TUBES EVE Manual De Uso página 16

The TUBES Plug&Play App also allows
you to make the most of all the Eve fea-
tures previously described. Additionally,
there are features that can be used only
via app and these are listed below:
• Temperature Control
NB: this can only be used via the
TUBES Plug&Play App.
Eve's heating temperature can only
be controlled via the TUBES Plug&Play
App. All you need to do to set the de-
sired temperature is to move the cur-
sor along the temperature control bar
on the Eve home page. When the set
temperature is reached, Eve remains in
maintenance mode, that is it keeps the
room at the set temperature (automa-
tically switching the resistances on and
off according to the temperature mea-
sured).
Remember that the temperature set via
the app remains stored and the device
will be automatically set to that tem-
perature every time it is switched back
on again. The only way to change the
temperature without the app is to use
the reset to factory settings procedure,
which restores the temperature, open
window detection and weekly program-
ming to their original settings.
• Lighting Control
The brightness of Eve's lighting can be
controlled via the TUBES Plug&Play App
too. By clicking "lighting" in the extra
features at top right, you only need to
move the cursor along the brightness
control bar until you reach the desired
level.
Remember that the brightness of the
light set via the app remains stored and
the device will be automatically set to
that brightness every time it is switched
back on again.
16
• Weekly Programming
NB: this can only be used via the
TUBES Plug&Play App.
Weekly Programming allows you to pro-
gramme your home heating 24 hours
a day and 7 days a week, to maximize
comfort in your home and reduce ener-
gy wastage even when you are away
from home. More specifically, it allows
you to set the times when you want to
turn the heating on and off every day of
the week.
To access Weekly Programming with
the app, click the extra features icon at
top right and select "Weekly Program-
ming". Select the times of day when
you want the heating to be turned on.
A white circle around the selected time
shows when heating is set to be
turned on.
During the times when heating is on,
Eve operates at medium power (mo-
derate flow) to reach the room tem-
perature set on the home page. When
Weekly Programming is set via app, the
MODE control becomes YELLOW
When the temperature set for the
programmed time period is reached,
Eve does not switch off, but remains
in maintenance mode (automatically
switching on and off according to the
detected temperature).
• Open window detection
NB: this can only be used via the
TUBES Plug&Play App
When the device detects a sudden drop
in temperature (presumably because
a door or a window has been opened)
the heating is temporarily switched off
for 30 minutes or until the room tem-
perature starts to rise again.
When an open window is detected, the
LED on the MODE key
a colour corresponding to the selected
mode of operation.
To use this feature with the app, click
the extra features icon at top right and
select "Open Window".
cod. MAN#EVE - Luglio/July 2019
flashes with