Power Connection - AudioSonic CL-1482 Manual De Instrucciones

1. AM/FM BAND BUTTON
2. >>| / Y-M-D / DST BUTTON
3. SNOOZE / SLEEP BUTTON
4. ALARM SET BUTTON
5. ON / OFF BUTTON
6. |<< / TEMP / °C/°F BUTTON
7. ALARM 1 RADIO / BUZZ BUTTON
8. ALARM 2 RADIO / BUZZ BUTTON
9. MODE BUTTON
10. LED DISPLAY
11. RESET BUTTON
12. DISPLAY AUTO OFF / LOW / HIGH DIMMER

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up
system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment. If an AC power failure occurs, the clock
automatically switches to the battery power supply, the clock and timer memory continue running. When
the AC power resumes, the clock switches back to AC again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – press mode set button (9) in normal mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press mode set button (9) to change
the mode cycle as follows.
Normal g Year g Month g Day
Action (during data adjustment):
Press |<< / TEMP / °C / °F button (6) to adjust data backward
-
Press >>| / Y-M-D / DST button (2) to adjust data forward
-
Keep depress |<< or >>| button for 2 seconds to enable auto forward.
-
B. Setting Alarm 1 and Alarm 2 – press alarm set button (4) during normal mode and keep depress
over 2 seconds to enter alarm set mode, after enter the setting mode, press alarm set button (4) to
change the mode cycle as follows :
Normal g AL 1 Hour g AL 1 Min
g Normal
ENGLISH
13. AC POWER CORD
14. TEMPERATURE SENSOR (IN DOOR)
15. FM ANTENNA
16. INFRARED SENSOR
17. LINE IN JACK
18. VOLUME KNOB
19. TUNE KNOB
20. SPEAKER
21. RATING LABEL
22. BATTERY DOOR
g 12/24 H g RTC Hour g RTC Min
g AL 1 weekend Alarm g AL 2 Hour
g Normal
g AL 2 Min g AL 2 weekend alarm