Description Of The Machine - Beper 90.345 Manual De Instrucciones

Pasta Machine Use instructions
Mulinella Beper is intended for household use and is made to very high quality standards.
It will offer you reliability and safety over time allowing you to make the best fresh pasta
with natural ingredients chosen by you, quickly and safely in your own home.
This handbook is an integrating part of the machine. Please carefully read through all the
rules of safety, instructions and warranty conditions before using the machine. Keep this
handbook carefully and near at hand to be able to refer to it for any need. For any doubts
or unforeseen use, inquire with your dealer before installation, quoting the MODEL.
WARNING!
Any use of the machine not provided for herein shall be considered incorrect or improper. The ma-
chine is intended only and exclusively for mixing, rolling or cutting pasta and may not be used for
other purposes.
The Manufacturer disclaims any liability in the event of:
- improper use;
- incorrect installation;
- alterations or operations not authorised by the Manufacturer;
- use of non genuine spares or not specific to the model.

DESCRIPTION OF THE MACHINE

A - Machine body
B - Handle
C - Clamp
D - Cutter roller attachment slot
E - Clamp housing slot
V - Clamp screw
F - Stretching roller attachment slot
G - Adjustment knob
H - Stretching rollers
I - Cutter rollers
L - Knob lever
USE OF THE MACHINE
Before each time of use: follow the instructions given in the "Cleaning and maintenance" paragraph.
1 - Set the pasta machine (A) near the edge of firm surface able to bear its weight, insert the clamp
(C) in the clamp housing slot (E), tighten the clamp screw (V) until the machine is firmly clamped to
the resting surface.
2 - Keeping the lever (L) pressed, turn the adjustment knob (G) to position 9 (max roller opening),
insert the handle (B) in the attachment slot (F) of the machine, lay part of the previously prepared
dough on the stretching rollers and turn the handle clockwise (making the stretching rollers turn).
This will obtain a first shaping of the sheet. Fold it in two and pass it through the rollers again to
make it homogeneous.
3 - To reduce the thickness, turn the adjustment knob (G) clockwise to reduce the distance between
the stretching rollers (H).
Pass the dough through again repeating the operation until obtaining the required thickness.
4 - To cut the sheet with the cutter rollers (I), after choosing the required cutting size, remove the
handle (B) from the attachment slot (F) and insert it in one of the attachment slots (D).
Rest one end of the sheet on the cutter rollers (I) and turn the handle counter-clockwise.
7