Berner BPS59E Instrucciones De Manejo página 17

PLUNGE SAW
Congratulations!
You have chosen a Berner tool. Years of experience,
thorough product development and innovation make
Berner one of the most reliable partners for professional
power tool users.
POSITION OF THE DATE CODE (fi g. 6)
The date code is stamped onto the side of the base
plate (z).
Technical data
Item number
Type
Voltage
Power
No-load speed
Blade diameter
Maximum depth of cut
90˚ (without guide rail)
90˚ (with guide rail)
Blade bore
Bevel angle adjustment
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for each
signal word. Please read the manual and pay attention
to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation
which, if not avoided, may result in property
damage.
L
K
L
K
BPS59E
094227
Vibration total values (triax vector sum) determined
2
according to EN 60745:
V 220-240
BPS59E Vibration emission value = 2.8 m/s
DC
W 1300
min -1 1750-4000
mm 165
The declared vibration emission value has been measured
in accordance with a standard test method and may be
mm 59
used for comparing one tool with another.
mm 55
The declared vibration emission value may also be used
mm 20
in a preliminary assessment of exposure.
47°
kg 5
10 Amperes, mains
13 Amperes, in plugs
An estimation of the level of exposure to vibration
experienced during a given period of work should also take
into account the times when the tool is switched off and
when it is running idle in addition to the trigger time.
This may signifi cantly reduce the exposure level over the
total working period.
EC-Declaration of conformity
MACHINERY DIRECTIVE
BPS59E
Berner declares that these tools have been designed in
compliance with:
2006/95/EC, EN 60745-1, EN 60745-2-5.
17
Denotes risk of electric shock.
Denotes risk of fi re.
(sound pressure)
pA
(sound pressure uncertainty) dB(A) 3
pA
(acoustic power)
WA
(acoustic power uncertainty) dB(A) 3
WA
Uncertainty K = 1.5 m/s
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. This could lead to a signifi cant
underestimate of exposure when the tool is used
regularly in such a way.
E N G L I S H
BPS59E
BPS59E
dB(A 92
dB(A) 103
2
2