Package Contents - Berner BPS59E Instrucciones De Manejo

Ocultar thumbs Ver también para BPS59E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36

Package contents

The package contains:
1
Plunge saw
1
Allen key
1
Instruction manual
1
Exploded drawing
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
Description (fi g. 1–3)
WARNING: Never modify the power tool or
any part of it. Damage or personal injury could
result.
INTENDED USE
The BPS59E plunge saw is designed for professional
sawing applications and cutting wood products.
DO NOT use under wet conditions or in presence of
fl ammable liquids or gases.
This heavy-duty plunge saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
a.
plunge trigger
b.
on/off switch
c.
main handle
d.
shoe
e.
bevel adjustment knob
f.
depth adjustment knobs
g.
depth scale
h.
front handle
i.
dust extraction outlet
j.
rail adjuster
k.
blade
l.
lock button
m. lock lever
n.
blade clamping screw
o.
outer fl ange
p.
inner fl ange
q.
riving knife
r.
riving knife adjustment screws
s.
speed wheel
t.
cutting indicator
u.
anti-kickback knob
v.
outer guard
w. guide rail
x.
clamp
y.
blade position indicators
Electrical safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the
voltage on the rating plate.
Your Berner tool is double insulated in
accordance with EN 60745; therefore no earth
wire is required.
If the supply cord is damaged, it must be replaced by
a specially prepared cord available through the Berner
service organization.
Mains plug replacement
(U.K. & Ireland only)
DANGER:
Should your mains plug need replacing and you are
competent to do this, proceed as instructed below. If
you are in doubt, contact an authorized Berner repair
agent or a qualifi ed electrician.
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug with
bared copper conductors is dangerous if engaged in
a live socket outlet.
Only fi t 13 Amperes BS1363A approved plugs fi tted
with the correctly rated fuse (1).
The cable wire colours, or a letter, will be marked
at the connection points of most good quality plugs.
Attach the wires to their respective points in the plug
(see below). Brown is for Live (L) (2) and Blue is for
Neutral (N) (4).
Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the outer
sheath of the cable fi rmly and that the two leads are
correctly fi xed at the terminals crews.
4
3
21
E N G L I S H
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido