Settings Mode; Edit Mode - Hyperion IRT 3-1 PcD Manuale Di Uso E Manutenzione

8.

Settings Mode

8.1 Log In
To enter the settings mode you fi rst have to "log in". Press
both arrow keys as you turn the main switch on. The
display will ask you for a PIN code.
8.2 PIN code
Use the arrow keys to fi ll in the correct digit. Press enter to
confi rm and edit the second, third, and fourth digit of the
code.
No code is required for basic settings, just press OK for the
default code of 0000. To change this code, read chapter
"8.4.5 Basic PIN Code".
Advanced PIN code
Used for program adjustments and advanced settings.
To change this code, read chapter 8.4.13 "Advanced Pin
Code".
Attention! an entered PIN code is valid globally in the
software until the main switch is turned off, i.e. if you enter
advanced settings mode and then exit to program mode.
The program editing will still be editable until the main
power is turned off.
8.3 Navigation
To adjust a setting, press edit. To go back from edit mode to
settings mode without saving, press cancel.
Note! If you press exit from settings mode you will be re-
directed to "program mode". You will then need to repeat
from step "8.1 Log In" to enter "8.4 Settings" again.

edit mode

Use arrow keys to change
language and select to
confi rm.
6
IRT 3-1 PcD, IRT 3-2 PcD and IRT 3-20 PcD
Press exit and you
will be directed to
"program mode".
Use the arrow keys to
scroll through the set-
tings, see table in chapter
8.4.
8.4 Settings
Ch.
8.4.1
8.4.2
8.4.3
8.4.4
8.4.5
8.4.6
8.4.7
8.4.8
8.4.9
8.4.10
5780
8.4.11
8.4.12
8.4.13
8.4.14
8.4.15
8.4.16
8.4.17
8.4.18
8.4.19
8.4.20
8.4.21
8.4.1
Use the up and down arrow keys to scroll through the four-
teen different languages (arranged alphabetically) until the
correct language appears. Press select to confi rm.
If you accidently switch to a language that you don´t under-
stand, turn the main switch on while pressing the "cassette
in use" button. The dryer will then start up with British
English.
8.4.2
Not applicable for this model.
8.4.3
Not applicable for this model.
8.4.4
The sound effects can be muted/activated by using the
arrow keys to select no/yes. Press select to confi rm.
Overview Basic Advanced
1 Select Language
3 Process Alarm
4 Temp Unit
5 Buzzer x
7 Basic PIN Code
8 Short Dist lim.
9 Long Dist lim.
15 Temperature Ctrl
16 Disp. Contrast x
18 Distance
23 Filter Time
25 Contin. Mode
36 Advanced PIN Code
37 Dist Unit
43 Advanced Code
44 Reset Prog. Settings
45 Reset Filter Timer
46 Statistics x
47 Perform Self test x
48 Program Time Scale
49 Proc. Alarm Temp.
1 Select Language
3 Process Alarm
4 Temp. Unit
5 Buzzer
available in
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
713686 rev 7