Check Before Use; Warranty Conditions - Altrex RS TOWER 24 Manual De Instrucciones

4. Check before use

1. Check that the rolling tower is horizontal (check using a spirit level).
2. Check that the rolling tower is assembled in accordance with this manual and in conformity with the configuration and ballast table.
3. Check that the environmental factors, such as swinging doors, awnings that operate automatically, aboveground electrical cables, traffic
and/or passers-by, etc., do not lead to dangerous situations.
4. Check that the rolling tower can be used safely and that it is suitable for the intended purpose.
5. Assembling the RS TOWER 24/44/54/44-POWER
1. Put the wheels into the folding frame, lock these, put the brakes on and put them in an outward direction.
2. Unfold the folding frame.
3. Place the platform.
6. Moving the rolling tower
The rolling tower may only be moved while observing the following conditions:
1. When the rolling tower is moved, persons and/or materials may not remain on the mobile unit.
2. Beforehand, checks should be made that the environmental factors, such as swinging doors, canopies, pits, automatically functioning
awnings, aboveground electrical cables, traffic and/or passers-by, etc. do not lead to dangerous situations while the scaffold is moved.
3. Only move the scaffold manually in a lengthways direction, over a flat, horizontal and sufficiently load-bearing surface.
4. After moving the rolling tower has to be realigned horizontally using a spirit level.
7. Disassembly of the rolling tower
The scaffold should be disassembled following the instructions for assembly but in reverse order.
8. Inspection, Care and Maintenance
1. Scaffold parts must be handled and transported with care in order to avoid damage.
2. Storage should be organised in such a way that only undamaged parts, in the correct amounts, are available for assembly of the scaffold.
3. Check all moving parts for correct functioning and check that these are not filthy.
4. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original Altrex parts. To
prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting (fastening) and/or repair are at your
own expense and risk. Altrex shall not be liable for damage resulting from erroneous mounting and/or repair.
5. Scaffolds for professional use must be inspected periodically by an expert.

9. Warranty conditions

Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.
All rights reserved. No part of this publication may be duplicated, stored in an automated database, or disclosed in any way or manner, whether
electronically, mechanically by photocopying, recording, or in any other way, without prior permission of Altrex B.V. Zwolle. This publication may only
be used for Altrex products. Misprints and printing errors reserved.
5
www.altrex.com
EN