RuarkAudio MRX Guia Del Usuario página 7

4. Install the Ruark Link app
Download and install the app on your mobile device.
5. Connect to mains power
Fit the correct plug for your region to the mains adapter,
it will "click" into place. Connect the mains adapter to
the DC power socket on the back of your MRx, then
connect it to the mains socket. All three indicator lights
will illuminate as your MRx starts up.
6. Set up your MRx using Ruark Link
Your MRx is in setup mode when all three lights on the
front panel flash in sequence.*
Open the Ruark Link app on your mobile device, select
"SET UP AUDIO SYSTEM" and follow the on-screen
instructions.
If the setup wizard is unable to find your MRx, you may
need to connect to your MRx's Wi-Fi hotspot manually,
go to the Wi-Fi settings on your mobile device and
connect to Ruark MRx [code] where [code] is the
unique MAC address of your MRx. Once you have
connected your device to your MRx Wi-Fi hotspot,
return to the Ruark Link app and follow the on-screen
instructions.
7. Enjoy your MRx
Once set up, you can control your MRx using the Ruark
Link app from any smartphone or tablet on the same
network, as well as access all its features including
internet radio, music streaming services and multi-room
audio.
* If instead of all the lights flashing in sequence, only
one indicator light comes on, press and hold the
CONTROL KNOB for approx 4 seconds until all 3 lights
illuminate, then release. Your MRx will reboot and come
on again in SETUP mode.
EN
DA
DE
FR
IT
ES
NL
NO
EN-7