Site Selection - NetSpa VITA Guia De Instalacion Y De Utilizacion

WARNING : Spa installed on inadequately level surfaces are subject to leaking. forming irregulari-
ties or collapses. which can result in properly damage or serious injury for those in or around the spa
area!
CAUTION : Please choose your set-up area carefully as lawn and other desirable vegetation
undereath the ground cloth (if applicable) wil die. furthermore, try to avoid setting the ground cloth in
areas prone to aggressive plant and weed species, as they may grow trough the ground cloth.

4.1. Site selection

WARNING : Before proceed to installation your spa, please make sure that the future
location meets the following conditions :
• A level place
• Wide enough to support the pool and its pump unit.
• Able to support more than 500 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
A place with an awning
4.2. RCD test
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
1. Insert the plug into the
power outlet.
Grounding
You are recommended to use the services of a qualified electrician to ensure that the spa is
electrically grounded by using a copper conductor of at least 2.5 mm² cross
section.
Clean the place
2. Press the «RESET» button,
the indicator light turns red.
4. INSTALLATION
3. Press the «TEST» button,
the indicator light turns off.
A level place
4. Press the «RESET» button,
the indicator light turns red.
The RCD works properly.
EN