Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
_- CHECKLIST
Before you operate your new snow
thrower, to ensure that you receive the
best performance and satisfaction from
this quality product, please review the
following checklist:
_' All assembly instructions
have been
completed.
_' The discharge chute rotates freely.
_' No remaining loose parts in carton.
_' Check the fasteners. Make sure all
fasteners are tight.
_' Check the air pressure of the tires.
Correct air pressure is from 14 to 17
PSI. See the side of the tire for maxi-
mum inflation. Do not exceed maxi-
mum inflation.
_' On electric start models, the unit was
shipped with the starter cord plugged
into the engine, Before operating, un-
plug the starter cord from the engine.
While
learning
how to use your snow
thrower,
pay extra attention
to the fol-
lowing
important
items:
_'
Engine
oil is at proper
level.
Use a
high
quality
detergent
oil classified
"For
Service
SG,
SH,
SJ,
SL,
or
higher".
_'
Make sure gas tank is filled
properly
with clean,
fresh,
unleaded
gasoline
with a minimum
of 85 octane.
_'
Become
familiar
with
all controls-
their
location
and function.
Operate
controls
before
starting
engine.
Publicidad
Tabla de contenido
