ZENOAH KOMATSU G4100 Manual De Instrucciones página 36

F19
36
English
8. Operating the engine
WARNING
Continuing to use the product in the anti-freeze
mode even when temperatures have risen and
returned to normal, may result in the engine failing
to start properly or in the engine failing to operate
at its normal speed, and for this reason you should
always be sure to return the unit to the normal
operating mode if there is no danger of icing
occurring.
HOW TO SWITCH BETWEEN OPERATING
MODES (F19)
1. Flip the engine switch to turn off the engine.
2. Remove the cover to the air filter, remove the air
filter, and then remove the choke knob from the
cylinder cover.
3. Loosen the screws holding the cylinder cover in
place (i.e., the three screws on the inside and the
one screw on the outside of the cover), and then
remove the cylinder cover.
4. Press with your finger down on the icing cap located
on the right-hand side of the cylinder cover to
remove the icing cap.
5. Adjust the icing cap so that the "snow" mark faces
upwards and then return it to its original position in
the cylinder cover.
6. Fix the cylinder cover back into its original position,
and then fix all other parts back into their proper
positions.
(1) Choke knob
(2) Cylinder cover
(3) Icing cap