Technical Features - ERRECOM PureZone MACHIN Manual De Uso

PureZone Machine is an electronic ultrasonic device which atomizes an antibacterial liquid (PureZone) in order to be
distributed by the vehicle A/C system's recirculation system.
One of the main advantages of an ultrasonic atomization system is to obtain atomized liquid particles at ambient
temperature. This prevents condensation which typically occurs when a liquid is atomized by heating it to a higher
temperature.
The liquid particles which are atomizes with PureZone Machine are smaller than 5µm and do not easily settle on
surfaces they encounter. Hence, they will fully propagate in the A/C system and in the vehicle cockpit.
Such a condition cannot be realized with traditional aerosol cans, as the size and the weight of their atomized particles
will lead to their prompt precipitation.
One antibacterial treatment with PureZone Machine takes minimum 11 minutes at 20 °C and automatically stops
once minimum liquid level is reached.
At higher ambient temperature the treatment will take less time; at lower ambient temperature, instead, it will take
more time.
4
WARNING
Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.
ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.
IST.AB1032.01.indd 9
INTRODUCTION

TECHNICAL fEATURES

1
2
Use PureZone Machine exclusively with the chemical product
PureZone.
The warranty of the ultrasonic nebulizer PureZone Machine is
valid only if you use the chemical product PureZone.
Eventual damages to the ultrasonic nebulizer referable to the
use of a chemical product different from PureZone WILL NOT
be covered by warranty.
• POWER SUPPLY: 220V – 50/60 Hz
• POWER SUPPLY PLUg: SCHUCO
• NOISE LEVEL: ≤ 70 DBA
• OPERATINg TEMPERATURE: 0 °C ÷ 60 °C
• NEBULIzATION RATE: ≈ 500 ML/H
• DIMENSIONS: L285 x P130 x H210 MM
• WEIgHT: 3.1 Kg
3
1. Ultrasonic nebulizer
2. Conveyor tube
3. 3 mt flexible hose with clip
4. Supply cable
UK
IST.AB1032.01
18/04/11 09.21