Contrast; Installing The Usb Virtual Com Drive - MasterCool 69789-220 Instrucciones De Operación

considered purely indicative; the manufacturer declines any and all responsibility for incorrect
data.

CONTRAST

Keys 4 and 5 may be used to adjust the screen contrast. Key 4 decreases contrast; key 5
increases contrast.
Contrast control is active only with the machine in the main menu and with "AUTOMATIC
PROCEDURE" flashing.

INSTALLING THE USB VIRTUAL COM DRIVE

System requirements for installing the drive:
1. 2008 machine
2. Iarvircomport.inf driver software
3. USB cable (male plug A / male plug B);
4. Computer with USB port and Windows XP operating system.
Copy the iarvircomport.inf file to the desktop.
Connect the machine to the computer with the USB cable. A window will appear on the
desktop, reading: "Found New Hardware, USB Device"
The operating system will start the new hardware installation procedure.
When the Wizard asks "Can Windows connect to Windows Update to check for
software?" check the button "No, not this time" and click "Next."
From the installation window, check the button "Install from a list or specific location
(Advanced)" and click "Next".
At this point the computer will ask for the driver location. Click "Browse" and select the
iarvircomport.inf file, previously copied to the desktop. Click "Open" to confirm.
After having clicked "Next" again, the final window will appear, informing the user that the
Windows has finished installing the software. Click "Finish" to close.
INSTRUCTIONS MANUAL
-38-