Replacing the light bulb
When replacing the bulb of the fridge;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover
top and remove the light cover
3. Change the present light bulb with a new one of
not more than 15 W.
4. Replace the light cover and after waiting 5 minutes plug the unit.
Replacing LED Lighting
If your fridge has LED lighting contact the help desk as this should be changed by
authorized personnel only.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
•
The original packages and foamed polystyrene (PS) can be retained if required.
•
During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
•
Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper...) should be taken out or fixed with bands in order to prevent them
from getting damaged.
BEFORE CALLING YOUR AFTER SALES
SERVICE
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if:
•
There is a power failure,
•
The mains plug is not plugged in properly, or is loose
•
The thermostat setting is on position "•",
•
The socket is defective. To check this, plug in another appliance that you know is working
into the same socket.
The appliance performs poorly,
Check if:
•
You have overloaded the appliance,
•
The doors are not closed properly,
•
There are not enough ventilation ducts on the kitchen unit as mentioned in the
Installation Manual.
If there is noise:
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry, this is quite normal. If you
hear a different sound,
check if:
•
The appliance is installed firmly as described in the Installation Manual.
•
The objects on the appliance are vibrating.
12