Nail Loading - Max HN65 Manual De Operaciones

Door Latch
Magazine
Nail Support
Slot
Feed Pawl
Nail
2
1

NAIL LOADING

q Open the Magazine:
Pull up Door Latch and swing Door open. Swing Magazine Cover open.
w Check adjustment:
The Nail Support can be moved up and down to four settings. To change setting pull
up on the Nail Post and twist to the correct step. The Nail Support should be
adjusted correctly to the position indicated in inches and millimeters inside
Magazine.
e Nail loading:
Place a coil of nails over the Nail Post in the Magazine. Uncoil enough nails to reach
the Feed Pawl, and place the second nail between the teeth on the Feed Pawl. The
nail heads fit in slot on Nose.
r Swing Magazine Cover closed.
t Close the Door.
Check that Door Latch engages. (If it does not engage, check that the nail heads are
in the slot on the Nose).
※ It is also possible to close the door first, followed by the cover.
11