Tabla de contenido
Publicidad
9.6 Planos de Control
12
THIS DRAWING IS PROPRIETARY TO RACINE FEDERATED INC. RECEIPT OR POSSESSION CONFERS NO RIGHT TO USE
THE SUBJECT MATTER OF THIS DRAWING OR TECHNICAL INFORMATION SHOWN; NOR THE RIGHT TO REPRODUCE THIS
DRAWING OR ANY PART EXCEPT FOR THOSE SUPPLIERS OF RACINE FEDERATED INC. WHO RECEIVE A WRITTEN
REQUEST FOR MANUFACTURE OR SIMILAR USE.
H
1. Refer to transmitter's installation manual for transducer location y mounting instructions.
2. Warning - to prevent ignition of flammable atmospheres, disconnect power before servicing.
G
3. Warning: substitution of components may impair intrinsic safety.
4. No revision to drawing without prior CSA-international approval.
5. Associated apparatus manufacturer's installation drawing must be followed when installing this
equipment.
6. Installation in Canada should be in accordance with the canadian electrical code, CSA C22.1,
Part 1, Appendix F.
7. Installation shall be in accordance with the national electrical code (ASME (ANSI) / NFPA 70)
F
Sections 504 y 505 y the ASME (ANSI) / ISA RP12.6 installation of intrinsically safe systems for
hazardous (classified) locations.
8. The maximum non-hazardous location voltage is 250 Vac / Vdc.
E
D
Sensing surface: couple to pipe with RTV
or silicone grease supplied, per installation
manual Tfxd o&m.
C
B
A
3. RADII TO BE .005/.010
2. FINISH TO BE 63
1. REMOVE ALL BURRS AND BREAK SHARP EDGES .005/.010
NOTES: UNLESS OTHERWISE SPECIFIED
12
Fig. 58 Planos de transductores barrera I.S. UTT10-050S(X)F
104
11
10
Hazardous (classified) location
Class I division 1 groups C y D
Maximum ambient temperature: -40°C to +85°C
11
10
9
dTT series transducers
model no: dTTN-xxx-N000-f
0.93 metres minimum
(3")
(2 places)
9
IM-P197-02 MI Issue 1
8
7
302 metres maximum
(990")
(RG-59/U coax only)
8
7
Publicidad
Tabla de contenido
