Use Concept; Passwords And User Rights - Ecolab Versatronic Instrucciones De Servicio Breves

9 Use
Personnel:
9.1

Use concept

See operating instructions 417102269, chapter 'Use concept' .
9.1.1

Passwords and user rights

There are three user levels in the device with factory-configured user names, passwords
and user rights. Passwords can be changed in the device.
The following tables provide an overview of the user accounts set up at the factory and
the corresponding passwords as well as the access rights of the respective user level.
Default passwords
User levels
Factory password
CAUTION!
The passwords shown here are only for the "initial configuration" of the
device!
To ensure process security, we urgently point out that passwords must be
changed and stored securely after successful configuration.
Default user rights
User rights
Display
Display overview, individual and controller images
Calibration / Show calibration log
Configuration / Show parameters
Parameterisation / display parameters
Function level / Show data
Device info / display data
Calibrate touchscreen
Registration / Show registration image
Event list / Show event list
Use
Acknowledge alarms
Controller image / Set nominal values,
Switch to manual mode
Controller configuration / Self-optimisation
Carry out calibration
User level / Change parameters
Configuration / change parameters
Parameterization / change nominal value
n Operator
Without
logon Operator
- 08662
37
Master Service
08662 (reserved for Ecolab)
User level
Without
Operator
logon
X X
X X
X X
X X
X X
X X
X X
X X
X
X
X
X
X
X
417102279 Rev. 2-08.2020
Use
Master Service
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X
X X