Dis-Assembly Instructions - Blatchford Elite2 Instrucciones De Uso

9 Dis-assembly Instructions

Use appropriate health and safety equipment at all times including
extraction facilities.
Be aware of finger trap hazard at all times.
1.
Carefully remove, with a knife, any foam cosmesis
that may be adhered to the foot shell.
3.
Remove the toe spring to leave the carrier/heel
spring assembly alone inside the foot shell.
2.
Remove securing screws from the carrier and
pull the toe spring towards the rear of the foot.
4.
Rotate the carrier/heel spring assembly toward
the rear of the foot to dis-engage the spring from
it's location in the shell.
9 9
938223S/3-0520