Steam Ironing - Silvercrest SDB 2400 F4 Instrucciones De Uso

2) Check the care instructions on the labels in garments to see if they are suitable
for being ironed, and at which temperature setting .
Temperature control
3) Select the appropriate temperature setting with the temperature control 8 .
NOTE
► Always place the iron on the base 0 while it heats up . If you place the
iron on the sole of the iron q and do not move it, the automatic switch­off
will be activated after 30 seconds (see section Automatic switch-off)
and the appliance stops heating up .
■ The temperature control lamp 7 lights up . When the set temperature has been
reached, the temperature control lamp 7 goes out .
4) Wait until the temperature control lamp 7 goes out .
■ To moisten the laundry, press the spray button
■ This function is suitable for very dry and very crumpled garments .

Steam ironing

1) Set the steam control 3 to the desired steam setting .
2) The temperature control 8 must be set to at least the
Otherwise no steam will be produced .
■ 50 │ GB │ MT
symbol 8
Material type
Synthetics
Silk, wool
Cotton, linen
5 .
setting .
SDB 2400 F4