Description Of Accessories; Ec Declaration Of Conformity - Vortice VORTICEL MP Serie Manual De Instrucciones

prevent correct cooling. Regular maintenance is
essential for correct functioning and to achieve the
declared levels of performance. Follow the
instructions in the figures on page 44 to perform the
necessary mechanical maintenance.

DESCRIPTION OF ACCESSORIES

Safety mesh frame
Fits over the appliance's delivery inlet to prevent
accidental contact with moving parts if the appliance
is installed at an accessible height (fig. 4).
If necessary, fit a counter-frame between the safety
mesh frame and the external wall to maintain a gap of
at least 25 mm between the fan rotor and the mesh.
Gravity shutter
Prevents wind and rain from blowing in through the
appliance when switched off. The gravity shutter also
incorporates a safety mesh to prevent access to
contact with moving parts.
Spacer for panel mounting
Reduces the distance by which the appliance
protrudes outwards. Particularly useful to avoid
contact with security bars, roller blinds, etc..

EC DECLARATION OF CONFORMITY

VORTICE ELETTROSOCIALI S.p.A
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI) - ITALY
declares, under his own responsibility, that the
products in the range:
VORTICEL MP
conform to European Directives
• CEE 98/37
• CEE 89/336
according to the following standards:
EN 292-1 (1991)
EN 292-2 (1991) + A1 (1995)
EN 60204-1 (1997)
12
N.B.
Do not submerge the electric motor in water or
any other liquid.
Voltage regulator
3 position speed controllers.
IRM 30 single phase voltage regulator for models
MP 254 M, MP 304 M.
IRM 40 single phase voltage regulator for models
modelli MP 252 M, MP 302 M, MP 354 M,
MP 404 M.
IRT 15 three phase voltage regulator for models
MP 304 T, MP 354 T, MP 404 T, MP 554 T.
IRT 35 three phase voltage regulator for models
MP 302 T, MP 506 T, MP 454 T, MP 504 T, MP 606 T.
IRT 40 three phase speed controller for model
MP 604 T.
Electronic speed controller
Speed controllers for single phase fans.
IREM 3 for models MP 252 M, MP 304 M,
MP 354 M, MP 404 M.
IREM 5 modelli MP 252 M, MP 302 M, MP 304 M,
MP 354 M, MP 404 M.
IREM 9 for one or more fans, up to a maximum of
9 A, for models modelli MP 252 M, MP 304 M,
MP 354 M, MP 404 M.
IRET 6 for model MP 604 T.
EN 55014-1 (2000) + A1 (2001) + A2 (2002)
EN 55014-2 (1997) + A1 (2001)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) + A1 (2001)
EN